Water Loss Remediation

When the Fans Dry, Do Not Let the Contaminants Fly

Verify your equipment is working and a job is mold-free after a water loss remediation project.

During a water loss, it is standard to turn the fans on to dry out a structure. The problem is, when fans are running, mold spores and other contaminates that could be laying in fabrics/carpet and on surfaces can actually resuspend into the air and potentially cause a worse problem.

InstaScope can be used by restorers to ensure their equipment works and jobs are cleaned properly. After a mold remediation project or water loss restoration job, use Instascope to verify low mold presence in a room or structure.

Drying a concrete floor under a fabric covering. After pouring, initial drying, and then drilling and blowing hot air into the heating zone and drying the outgoing air.
DT_workingEquipment_Web_SEP20

Know if your equipment is working properly.

Monitor the progress and efficiency of a water loss job. Take air samples

  1. Pre remediation
  2. During remediation
  3. Post remediation

And ensure a healthier indoor air environment for your customers.